Please Note: This article is written for users of the following Microsoft Excel versions: 97, 2000, 2002, and 2003. If you are using a later version (Excel 2007 or later), this tip may not work for you. For a version of this tip written specifically for later versions of Excel, click here: Accurate Font Sizes.
You already know that Excel allows you to easily change the size of your fonts using various tools and menus. You may not know, however, that Excel can use virtually any point size you want, not just those listed in the drop-down size lists.
Font sizes are specified in points, which are a typographer's measurement roughly equivalent to 1/72 of an inch. You can either select a size from the drop-down list or you can enter your own size. Select the size shown in the list and then type the size you actually want. When you press Enter, the size of the text in the cell (or your selected text within a cell) is changed.
It is also easy to overlook the fact that Excel can display and print fonts in increments of half a point. Depending on the typeface being used, this can make a big difference. For example, there is a very marked difference between 10 and 11 point Verdana, and 10.5 may be just what you need.
You obtain the half-sizes by typing them directly into the size box. If you try to type in any other fractional size (like 10.25 or 10.4), Excel rounds your entry to the nearest half-point. (Remember—you can only set full-point sizes or half-point sizes.)
ExcelTips is your source for cost-effective Microsoft Excel training. This tip (2125) applies to Microsoft Excel 97, 2000, 2002, and 2003. You can find a version of this tip for the ribbon interface of Excel (Excel 2007 and later) here: Accurate Font Sizes.
Solve Real Business Problems Master business modeling and analysis techniques with Excel and transform data into bottom-line results. This hands-on, scenario-focused guide shows you how to use the latest Excel tools to integrate data from multiple tables. Check out Microsoft Excel 2013 Data Analysis and Business Modeling today!
If your column headings are too large to work well in your worksheet, why not turn them a bit? Here's how.
Discover MoreOne way you can format a cell is so that its contents are repeated over and over again for the entire width of the cell. ...
Discover MoreYou can use some of the tools in Excel to convert cell references in formulas into names. Converting back (from names ...
Discover MoreFREE SERVICE: Get tips like this every week in ExcelTips, a free productivity newsletter. Enter your address and click "Subscribe."
There are currently no comments for this tip. (Be the first to leave your comment—just use the simple form above!)
Got a version of Excel that uses the menu interface (Excel 97, Excel 2000, Excel 2002, or Excel 2003)? This site is for you! If you use a later version of Excel, visit our ExcelTips site focusing on the ribbon interface.
FREE SERVICE: Get tips like this every week in ExcelTips, a free productivity newsletter. Enter your address and click "Subscribe."
Copyright © 2022 Sharon Parq Associates, Inc.
Please Note:
This article is written for users of the following Microsoft Excel versions: 97, 2000, 2002, and 2003. If you are using a later version (Excel 2007 or later), this tip may not work for you. For a version of this tip written specifically for later versions of Excel, click here: 
Comments