Please Note: This article is written for users of the following Microsoft Excel versions: 97, 2000, 2002, and 2003. If you are using a later version (Excel 2007 or later), this tip may not work for you. For a version of this tip written specifically for later versions of Excel, click here: Summing Based on Part of the Information in a Cell.

# Summing Based on Part of the Information in a Cell

Written by Allen Wyatt (last updated January 13, 2022)
This tip applies to Excel 97, 2000, 2002, and 2003

Kathy has a worksheet that includes information for all the parts in her warehouse. In this sheet, part numbers are shown in column A using the format 12345 XXX, where XXX represents a location code. This means she could have multiple entries on the worksheet for the same part numbers, but each entry representing a different location for that part. Kathy needs a formula that sums the values associated with each part number, regardless of its location code. Thus, she needs a way to sum the quantity column related to parts 12345 ABC, 12345 DEF, 123456 GHI, etc. She needs a way to do this without splitting the location code to a different column.

There is more than one way to get the desired answer. For the sake of the examples in this tip, assume that the part numbers are in column A (as Kathy indicated) and that the quantities for each part are in column B. It is these quantities that need to be summed, based upon just a portion of what is in each cell in column A. Further, you can put the part number (minus the location code) desired in cell D2.

The first potential solution is to use the SUMPRODUCT function, in this manner:

```=SUMPRODUCT(--(VALUE(LEFT(A2:A49,FIND(" ",A2:A49)))=D2),B2:B49)
```

This formula checks the values in the range A2:A49. You should make sure that this range reflects the range of your actual data. If you generalize the formula so that it looks at all of columns A and B (as in A:A and B:B), you'll get a #VALUE error, since it tries to apply the formula to empty cells in the columns.

You can get a similar result by using an array formula such as this:

```=SUM(B:B*(LEFT(A2:A49,5)=TEXT(D2,"@")))
```

Remember, again, that this is an array formula, so you need to enter it by pressing Shift+Ctrl+Enter. Note, as well, that this formula converts the value in D2 to text for the comparison. This wasn't done in the previous formula because there the substring picked out of column A was converted to a numeric value using the VALUE function.

You can also use the DSUM function to construct a working formula. Let's assume that the part numbers (column A) have a column header in cell A1. Copy this column header (such as "Part Num") to another cell in the worksheet, such as cell D1. In cell D2, enter the part number, without its location code, followed by an asterisk. For example, you could enter "12345*" (without the quote marks) into cell D2. With that specification set up, you can then use this formula:

```=DSUM(\$A\$1:\$B\$49,\$B\$1,D1:D2)
```

This formula uses the specification in cell D2 (the characters 12345 followed by anything) as a key to which values from column B should be summed.

Finally, if you had the same specification in cell D2 as you used with the DSUM approach, you could use a very simple SUMIF function, in this manner:

```=SUMIF(A:A,D2,B:B)
```

Note that this approach allows you to use the full column ranges (A:A and B:B) in the formula.

If your part numbers (in column A) are not as consistent in their format as you might like, then you may be better creating a user-defined function to find your quantities. For instance, if your part numbers aren't always the same length or if the part numbers can contain both digits and letters or dashes, then a UDF is the way to go. The following example works great; it keys on the presence of at least one space in the value. (Kathy indicated that a space separated the part number from the location code.)

```Function AddPrtQty(ByVal Parts As Range, PartsQty As Range, _
FindPart As Variant) As Long
Dim Pos As Integer
Dim Pos2 As Integer
Dim i As Long
Dim tmp As String
Dim tmpSum As Long
Dim PC As Long

PC = Parts.Count
If PartsQty.Count <> PC Then
MsgBox "Parts and PartsQty must be the same length", vbCritical
Exit Function
End If

For i = 1 To PC
Pos = InStr(1, Parts(i), " ")
Pos2 = InStr(Pos + 1, Parts(i), " ")

If Pos2 > Pos And Len(Parts(i)) > Pos + 1 Then
tmp = CStr(Trim(Left(Parts(i), Pos2 - 1)))
ElseIf Pos > 0 And Len(Parts(i)) > 0 Then
tmp = CStr(Trim(Left(Parts(i), Pos - 1)))
End If

If CStr(Trim(tmp)) = CStr(Trim(FindPart)) Then
tmpSum = tmpSum + PartStock(i)
End If
Next i

End Function
```

To use the function, in your worksheet call it using two ranges and the part number you want:

```=AddPrtQty(A2:A49,B2:B49,"GB7-QWY2")
```

Note:

If you would like to know how to use the macros described on this page (or on any other page on the ExcelTips sites), I've prepared a special page that includes helpful information. Click here to open that special page in a new browser tab.

ExcelTips is your source for cost-effective Microsoft Excel training. This tip (11468) applies to Microsoft Excel 97, 2000, 2002, and 2003. You can find a version of this tip for the ribbon interface of Excel (Excel 2007 and later) here: Summing Based on Part of the Information in a Cell.

##### Author Bio

Allen Wyatt

With more than 50 non-fiction books and numerous magazine articles to his credit, Allen Wyatt is an internationally recognized author. He is president of Sharon Parq Associates, a computer and publishing services company. ...

##### MORE FROM ALLEN

Changing Default Tab Stops

If you don't explicitly set tab stops in a paragraph, Word relies upon a default tab stop distance. You can adjust that ...

Discover More

Referencing the Last Cell in a Column

When developing formulas, you may need to reference the very last value in a particular column. This can seem perplexing, ...

Discover More

Excel provides two ways to filter your data so that only what you want to see is displayed. Discover how filtering works ...

Discover More

Create Custom Apps with VBA! Discover how to extend the capabilities of Office 2013 (Word, Excel, PowerPoint, Outlook, and Access) with VBA programming, using it for writing macros, automating Office applications, and creating custom applications. Check out Mastering VBA for Office 2013 today!

Matching Formatting when Concatenating

Convert a numeric value to text and you may be surprised by how Excel displays the value. Here's a run-down on exactly ...

Discover More

Finding Differences Between Lists

A common task faced by Excel users is to determine whether items in one list are also found in a different list. There ...

Discover More

Counting Groupings Below a Threshold

When analyzing data, you may need to distill groupings from that data. This tip examines how you can use formulas and ...

Discover More
##### Subscribe

FREE SERVICE: Get tips like this every week in ExcelTips, a free productivity newsletter. Enter your address and click "Subscribe."

If you would like to add an image to your comment (not an avatar, but an image to help in making the point of your comment), include the characters [{fig}] (all 7 characters, in the sequence shown) in your comment text. Youâ€™ll be prompted to upload your image when you submit the comment. Maximum image size is 6Mpixels. Images larger than 600px wide or 1000px tall will be reduced. Up to three images may be included in a comment. All images are subject to review. Commenting privileges may be curtailed if inappropriate images are posted.

What is 9 + 7?

There are currently no comments for this tip. (Be the first to leave your commentâ€”just use the simple form above!)

##### This Site

Got a version of Excel that uses the menu interface (Excel 97, Excel 2000, Excel 2002, or Excel 2003)? This site is for you! If you use a later version of Excel, visit our ExcelTips site focusing on the ribbon interface.